how many amps does 1400 electric fireplace draw?

 

Are you wondering how many amps a 1400-watt electric fireplace draws? You might be concerned about energy savings and fitting your new fireplace into existing electrical circuits. This blog will break down the calculations, compare models, and provide practical advice for homeowners.

Keep reading to find out all you need to know!

Key Takeaways

• A 1400-watt electric fireplace draws about 11.67 amps when operating on a standard 120-volt circuit.
• Voltage fluctuations can affect the amp draw; if voltage drops below 120 volts, the fireplace will draw more amps to maintain its power.
• Operating on high-efficiency ratings ensures better performance and lower electricity bills without overloading electrical circuits.
• For safety, install your electric fireplace on its dedicated circuit to avoid overloading and potential fire hazards.

Calculating Amps for a 1400-Watt Electric Fireplace

To determine the amps for a 1400-watt electric fireplace, use the formula: Amps = Watts / Volts. For example, if your home runs on 120 volts, divide 1400 watts by 120 volts to get about 11.7 amps.

 

Formula for Amp Calculation

 

To calculate the amps for a 1400-watt electric fireplace, use the formula: Amps = Watts / Volts. This fireplace operates at 120 volts. So, divide 1500 watts by 120 volts to get the amp draw.

In this case, \( \text{1500 watts} ÷ \text{120 volts} = 12.5 \) amps. Therefore, this electric fireplace draws approximately 12.5 amps from your power outlets.

 

Electricity is really just organized lightning. - George Carlin

Example Calculation

 

A 1400-watt electric fireplace plugged into a standard 120-volt outlet draws about 11.67 amps of current. Use the formula: Amps = Watts / Volts to get this result (1400 watts divided by 120 volts).

This calculation helps you understand how much load the fireplace places on your electrical circuit.

Electric fireplaces, such as those from Dimplex or Modern Flames, provide efficient heating without complex installation needs. They connect easily to existing home circuits and consume power similar to other household appliances.

Knowing their amp draw ensures safe usage within the electrical limits of your home.

Factors Influencing Amp Draw in Electric Fireplaces

Voltage variations can change the amp draw of an electric fireplace. Efficiency ratings impact how much power the unit consumes.

 

Voltage Variations

Voltage variations can greatly affect how many amps an electric fireplace draws. Electric fireplaces typically run on a 120-volt circuit, but minor fluctuations in voltage are common.

 

For instance, if the voltage drops below 120 volts, the fireplace will draw more amps to maintain its power consumption of 1400 watts.

On the other hand, higher voltages will decrease the amp draw needed to achieve the same wattage. This can happen due to various factors including changes in electricity demand or issues within the hvac industry infrastructure.

Homeowners should ensure their electrical circuits are stable to prevent damage and optimize efficiency for devices like electric fireplaces.

 

Efficiency Ratings

 

An electric fireplace's efficiency rating depends on its energy usage and heat output. The 1400-watt model draws 11 amps on a standard 120-volt circuit. Efficient models maximize heat while using less electricity, making them more cost-effective over time.

Energy-efficient fireplaces convert most of the electrical power into heat, reducing waste. A high-efficiency rating indicates better performance in heating a room without spiking electricity bills.

Electric fireplaces like those from Dimplex or Simplifire often showcase impressive efficiency ratings that cater to various needs and preferences. These models ensure comfort without drawing unnecessary power from your breakers.

Comparison with Other Common Electric Fireplace Wattages

A 1000-watt electric fireplace draws fewer amps than a 1400-watt model. On the other hand, a 2000-watt fireplace requires more power and will draw more amps.

 

1000-Watt Models

1000-watt electric fireplaces are ideal for smaller rooms. They operate efficiently on a standard 120-volt circuit without taxing your electrical system. These models draw roughly 8.3 amps, well within the limit of most household circuits that can handle up to 12.5 amps.

 

Choosing a 1000-watt fireplace ensures you have an energy-efficient heating solution for spaces around 150 square feet. It complements other low-powered devices like a power cord or small appliances connected to the same outlet.

Lower wattage options help maintain safety and prevent tripping fuses while keeping your room warm and cozy.

- 2000-Watt Models

 

2000-Watt Models

2000-watt electric fireplaces are powerful and provide significant warmth. They can draw up to 16.67 amps when using a 120-volt circuit. This high power usage is suitable for larger rooms, making them ideal for spaces around 400 square feet or more.

 

Energy efficiency might be a concern at this level, but many models come designed with better efficiency ratings to manage electricity costs. Brands like Dimplex and Modern Flames offer advanced models that balance between heat output and energy consumption effectively.

Showcasing Varieties of Electric Fireplaces

Electric fireplaces come in many types to suit different needs and styles. You can find models from trusted brands that offer various features.

 

Dimplex Electric Fireplaces

 

Dimplex Electric Fireplaces offer great heating solutions for homes. These units are energy efficient, operating at 120 volts and using 1500 watts of power. They can heat a room up to 400 square feet effectively while drawing around 12.5 amps from the electrical receptacle.

These fireplaces come in various styles to fit different home décors. Their realistic flame effects make them popular choices among homeowners looking for both warmth and ambiance without the hassle of real fire maintenance.

With their lightweight design, weighing only about 48 pounds, installation becomes easier compared to traditional fireplace inserts or furnaces.

 

Modern Flames Electric Fireplaces

 

Modern Flames Electric Fireplaces offer stylish and efficient heating solutions. Their models provide up to 1500 watts of power, drawing about 12.5 amps at 120 volts. These fireplaces can heat rooms up to 400 square feet, making them ideal for various living spaces.

They weigh around 48 pounds, ensuring easy installation without heavy lifting equipment like freight handlers or FedEx services. Modern Flames designs combine elegant aesthetics with high performance, making them a popular choice in the United States for those seeking functional and chic home heating solutions.

#### - Remii Electric Fireplaces

Remii Electric Fireplaces

Remii electric fireplaces offer sleek designs and powerful heating for modern homes. The 1400 model draws 1500 watts of power, pulling about 11 to 12 amps from a standard 120-volt outlet.

 

These fireplaces can heat rooms up to 400 square feet efficiently.

Since most American households have circuits that support up to 1500 watts, a Remii fireplace fits well into existing electrical setups. With an average cost of electricity around $0.13 per kilowatt-hour in the United States, running this unit is economical too.

Simplifire Electric Fireplaces also feature efficient heating solutions for similar spaces....

 

Simplifire Electric Fireplaces

 

Simplifire Electric Fireplaces are designed to provide efficient heating and an appealing visual display. Simplifire's models use 120 volts, drawing about 11 amps for a power output of 1500 watts.

These fireplaces are perfect for room coverage up to 400 square feet.

The Simplifire Scion 55 Built-in Linear Electric Fireplace is a popular model. It weighs around 48 pounds and offers easy installation options. This fireplace enhances your living space while keeping electricity usage in check, aligning with the average cost of electricity in the United States at about 13 cents per kilowatt-hour.

Highlighting Specific Models

Discover the unique features of several top-rated electric fireplace models, including their dimensions, heating efficiency, and design.

 

Dimplex Ignitexl 74 Linear Electric Fireplace

 

The Dimplex Ignitexl 74 Linear Electric Fireplace adds a sleek, modern touch to any room. It operates on standard 120-volt circuits and draws up to 1500 watts of power, needing around 12.5 amps from your electrical system.

This makes it efficient for heating rooms up to 400 square feet.

With its weight at just over 48 pounds, installation is straightforward without heavy lifting equipment. Its design includes realistic flame effects and multiple heat settings, making it versatile for different seasons and preferences.

For those focused on energy costs, note that the average electricity cost in the U.S. hovers around 13 cents per kilowatt-hour—making this fireplace both stylish and economical.

 

Modern Flames Orion Slim 60 Virtual Fireplace

 

The Modern Flames Orion Slim 60 Virtual Fireplace weighs 48.45 pounds and covers rooms up to 400 sq ft efficiently. Operating on a standard 120-volt circuit, it draws approximately 12.5 amps of power from an electrical outlet, keeping consumption in check.

This fireplace uses realistic simulations to mimic actual flames, providing warmth without the risk associated with traditional fireplaces. It's perfect for enhancing the ambiance of any room while maintaining low energy costs.

The unit's sleek design makes it a stylish addition to modern homes seeking functional heating solutions that are both attractive and efficient in total energy use.

 

Simplifire Scion 55 Built-in Linear Electric Fireplace

 

The Simplifire Scion 55 Built-in Linear Electric Fireplace is a sleek and modern heating solution. It draws 1500 watts of power, which translates to about 11 amps on a standard 120-volt circuit.

This model can effectively heat rooms up to 400 square feet, making it ideal for medium-sized spaces.

Weighing just over 48 pounds, the fireplace is easy to install and maneuver. Its design adds aesthetic appeal while providing practical use in colder months. The efficiency rating ensures that you get consistent warmth without overloading your electric circuits or dramatically increasing your energy bills.

Practical Implications of Amp Draw

Ensure your electrical circuit can handle the load of a 1400-watt electric fireplace. Use proper safety measures to prevent overheating and potential fire hazards.

 

Electrical Circuit Requirements

 

A 1400-watt electric fireplace needs a circuit that can handle at least 11.7 amps since it draws this amount of current. The standard voltage for home outlets is 120 volts, which means the fireplace uses this voltage to operate efficiently.

For safety, a single 120-volt circuit should only support up to 1500 watts of power draw.

Install the electric fireplace on its dedicated circuit to avoid overloading. Overloading could trip breakers or cause electrical issues in your home. Make sure the wiring and outlet match the required specifications: using high-quality components ensures safe operation and longevity of your appliance.

 

Safety Precautions

 

Always check that the electric fireplace operates on a dedicated 120-volt circuit. This ensures it does not overload your home's electrical system. Never plug an electric fireplace into an extension cord or power strip, as this can pose fire hazards.

Keep flammable materials like curtains and papers away from the unit. Ensure proper ventilation by placing the fireplace in an open area with at least a three-foot clearance around all sides.

Regularly inspect cords for any damage and replace them immediately if needed to prevent electrical shocks.

Conclusion

A 1400-watt electric fireplace running on a standard 120-volt circuit draws about 11.67 amps. This calculation is based on the formula for ampere determination, dividing the wattage by voltage (1400 watts/120 volts).

Ensuring your home's circuits can handle this load is crucial for safety and efficiency.

FAQs

1. How many amps does a 1400-watt electric fireplace draw?

A 1400-watt electric fireplace draws about 12 amps when using a standard voltage of 120 volts.

2. What is the British Thermal Unit (BTU) output of a 1400-watt electric fireplace?

A 1400-watt electric fireplace produces around 4777 BTUs, which helps in heating small to medium-sized rooms efficiently.

3. Can I use my credit card to buy an electric fireplace?

Yes, you can use your credit card to purchase an electric fireplace from most retailers that accept credit cards as payment.

4. Are there loans available for buying an electric fireplace?

Yes, some stores offer financing options or loans that allow you to pay for your new electric fireplace over time instead of all at once.